An official website of the United States government
Here's how you know
A .mil website belongs to an official U.S. Department of Defense organization in the United States.
A lock (lock ) or https:// means you’ve safely connected to the .mil website. Share sensitive information only on official, secure websites.

News from around the Fleet

USS Essex First Ship to Participate in NPS 3D Printer Research

11 July 2022

From Petty Officer 3rd Class Donita Burks, USS Essex Public Affairs

Essex is  participating in Rim of the Pacific (RIMPAC) 2022.
Dan Porter, a Xerox technician, left and Andrew Wong, right, Emergency Ship Salvage Material (ESSM), conduct diagnostics on a 3D printer aboard USS Essex (LHD 2), July 9, 2022.
PEARL HARBOR (July 9, 2022) Dan Porter, a Xerox technician, left and Andrew Wong, right, Emergency Ship Salvage Material (ESSM), conduct diagnostics on a 3D printer aboard the Wasp-class amphibious assault ship USS Essex (LHD 2), July 9, 2022. Twenty-six nations, 38 ships, four submarines, more than 170 aircraft and 25,000 personnel are participating in RIMPAC from June 29 to Aug. 4 in and around the Hawaiian Islands and Southern California. The world's largest international maritime exercise, RIMPAC provides a unique training opportunity while fostering and sustaining cooperative relationships among participants critical to ensuring the safety of sea lanes and security on the world's oceans. RIMPAC 2022 is the 28th exercise in the series that began in 1971. (U.S. Navy photo by Mass Communication Specialist 3rd Class Isaak Martinez)
Dan Porter, a Xerox technician, left and Andrew Wong, right, Emergency Ship Salvage Material (ESSM), conduct diagnostics on a 3D printer aboard USS Essex (LHD 2), July 9, 2022.
220709-N-KF697-1049
PEARL HARBOR (July 9, 2022) Dan Porter, a Xerox technician, left and Andrew Wong, right, Emergency Ship Salvage Material (ESSM), conduct diagnostics on a 3D printer aboard the Wasp-class amphibious assault ship USS Essex (LHD 2), July 9, 2022. Twenty-six nations, 38 ships, four submarines, more than 170 aircraft and 25,000 personnel are participating in RIMPAC from June 29 to Aug. 4 in and around the Hawaiian Islands and Southern California. The world's largest international maritime exercise, RIMPAC provides a unique training opportunity while fostering and sustaining cooperative relationships among participants critical to ensuring the safety of sea lanes and security on the world's oceans. RIMPAC 2022 is the 28th exercise in the series that began in 1971. (U.S. Navy photo by Mass Communication Specialist 3rd Class Isaak Martinez)
Photo By: MC3 Isaak Martinez
VIRIN: 220709-N-KF697-1049

PEARL HARBOR  – Naval Postgraduate School (NPS) partnered with Commander, Naval Surface Force, U.S. Pacific Fleet (COMNAVSURFPAC) in facilitating the installation of a 3D printer on Wasp-class amphibious assault ship USS Essex (LHD 2) during Rim of the Pacific (RIMPAC) 2022. Essex is the first ship to participate in the initial testing and evaluation of the 3D printer during underway conditions to determine the printer’s viability when out to sea.

As a proponent of enhancing overall readiness of any warfighting organization, Lt. Cmdr. Nicolas Batista, the Aircraft Intermediate Maintenance Department (AIMD) officer aboard Essex, said “Having this printer aboard will essentially accelerate, enhance and increase our warfighting readiness.”

Batista stated this 3D printer, is one of the fastest printers on the market, capable of fabricating and printing aluminum up to 10” by 10”. Many common components may be created on the ship to include heat sinks, housings, fuel adapters, bleed air valves, valve covers and more.

“The capabilities of the 3D printer will enable Essex to become more self-sufficient,” said Batista. He expressed that innovative operational concepts such as this 3D printing capability will be great additions in the future for every ship. 
Dan Porter, a Xerox technician, assembles a 3D printer head aboard the Wasp-class amphibious assault ship USS Essex (LHD 2), July 9, 2022.
PEARL HARBOR (July 9, 2022) Dan Porter, a Xerox technician, assembles a 3D printer head aboard the Wasp-class amphibious assault ship USS Essex (LHD 2), July 9, 2022. Twenty-six nations, 38 ships, four submarines, more than 170 aircraft and 25,000 personnel are participating in RIMPAC from June 29 to Aug. 4 in and around the Hawaiian Islands and Southern California. The world's largest international maritime exercise, RIMPAC provides a unique training opportunity while fostering and sustaining cooperative relationships among participants critical to ensuring the safety of sea lanes and security on the world's oceans. RIMPAC 2022 is the 28th exercise in the series that began in 1971. (U.S. Navy photo by Mass Communication Specialist 3rd Class Isaak Martinez)
Dan Porter, a Xerox technician, assembles a 3D printer head aboard the Wasp-class amphibious assault ship USS Essex (LHD 2), July 9, 2022.
220709-N-KF697-1041
PEARL HARBOR (July 9, 2022) Dan Porter, a Xerox technician, assembles a 3D printer head aboard the Wasp-class amphibious assault ship USS Essex (LHD 2), July 9, 2022. Twenty-six nations, 38 ships, four submarines, more than 170 aircraft and 25,000 personnel are participating in RIMPAC from June 29 to Aug. 4 in and around the Hawaiian Islands and Southern California. The world's largest international maritime exercise, RIMPAC provides a unique training opportunity while fostering and sustaining cooperative relationships among participants critical to ensuring the safety of sea lanes and security on the world's oceans. RIMPAC 2022 is the 28th exercise in the series that began in 1971. (U.S. Navy photo by Mass Communication Specialist 3rd Class Isaak Martinez)
Photo By: MC3 Isaak Martinez
VIRIN: 220709-N-KF697-1041


The next step in the evaluation of the printer will be to provide training to Sailors who will be using the equipment. As someone who enjoys hands-on learning, Aviation Structural Mechanic 3rd Class Roxanne Barrera expressed her excitement to be one of the first Sailors to receive this training.

“I was honored when my chain of command asked me to be the first Sailor aboard USS Essex to get the training for this 3D printer. I just want to learn how to operate it and share [the knowledge] with other people.”

While Essex has had the capability to manufacture small items needed on the ship, Aviation Electronics Technician 2nd Class Jonah Waage said, “We have never been able to make something with the precision and intricacy that this new 3D printer will provide which is important because it will contribute to saving time and money for our Navy in the long run.”

Batista stated that Commander Naval Air Force, U.S. Pacific Fleet (COMNAVAIRPAC) and Commander, Naval Air Systems Command (COMNAVAIRSYSCOM) have also initiated efforts to establish an AIMD work center, solely designed for the AM concept, and are striving towards the capability of fabricating needed aircraft parts with a 3D Printer.

“Additive Manufacturing (AM) has become a priority and it’s evident that AM will provide a greater posture in warfighting efforts across the fleet and will enhance expeditionary maintenance that contributes to our Surface Competitive Edge.”

During testing and evaluation at sea, a team aboard Essex will create various shipboard aluminum items with the 3D printer and provide feedback to NPS and COMNAVSURFPAC on the results.

Essex is  participating in Rim of the Pacific (RIMPAC) 2022.

For more news from USS Essex, follow us on Facebook at https://www.facebook.com/USSESSEX, or visit https://www.surfpac.navy.mil/lhd2
 

Google Translation Disclaimer

  • Google Translate, a third party service provided by Google, performs all translations directly and dynamically.
  • Commander, U.S. Navy Region Korea, cnrk.cnic.navy.mil has no control over the features, functions, or performance of the Google Translate service.
  • The automated translations should not be considered exact and should be used only as an approximation of the original English language content.
  • This service is meant solely for the assistance of limited English-speaking users of the website.
  • Commander, U.S. Navy Region Korea, cnrk.cnic.navy.mil does not warrant the accuracy, reliability, or timeliness of any information translated.
  • Some items cannot be translated, including but not limited to image buttons, drop down menus, graphics, photos, or portable document formats (pdfs).
  • Commander, U.S. Navy Region Korea, cnrk.cnic.navy.mil does not directly endorse Google Translate or imply that it is the only language translation solution available to users.
  • All site visitors may choose to use similar tools for their translation needs. Any individuals or parties that use Commander, U.S. Navy Region Korea, cnrk.cnic.navy.mil content in translated form, whether by Google Translate or by any other translation services, do so at their own risk.
  • IE users: Please note that Google Translate may not render correctly when using Internet Explorer. Users are advised to use MS Edge, Safari, Chrome, or Firefox browser to take full advantage of the Google Translate feature.
  • The official text of content on this site is the English version found on this website. If any questions arise related to the accuracy of the information contained in translated text, refer to the English version on this website, it is the official version.

Commander, U.S. Navy Region Korea   |   PSC 478 Box 1   |   FPO AP, 96212-0001
Official U.S. Navy Website